K11 color crystals can be used for drinking water, pool waterproof material. Excellent permeability, water-resistant, anti-aging properties. Strong bond with the substrate, brushing have good results in a variety of complex surface of the base. For the positive side or the back surface of the water, the effectiveness of its waterproof. High compressive strength, good wear resistance. Available in the the moist basic plane, can be carried out follow-up process to dryness. Scope: interior and exterior, kitchen, bathroom, balcony, reservoir, warehouse, basement waterproofing and wood flooring, wallpaper Stones moisture treatment. The product usage flat base surface 1.5-2kg/m2. Construction program base surface treatment: clean the base surface should be smooth and firm, without hollowing. Pores, trachoma is required with cement mortar to fill the flat, sharp edges should be removed. Such as high temperatures or drier base surface, before the construction of the application of water to fully wet to ignorance and water shall prevail. Construction process: first liquid material into the mixing bucket, stirring slowly pour the powder side with an electric mixer, stir until evenly without powder, no precipitation paste, put it aside for a few minutes and then slightly stirring can be used. If the slurry is too thick or drag brush, may be appropriate to add no more than 5% of the total amount of water, stir. Directly with a brush or roller to paint the processed base surface, not leak brush, brushing if holes should be repeated brushing the gas discharges. After brushing the first pass should let it the table dry (just sticky) after brushing the second time, the second brushing direction should be staggered, with the former again brushing can not exceed 1 mm in thickness, so as not to affect the construction effect. Note: You can not below 0 ℃ or rain construction, the stirred slurry should be used within 2 hours. The air is particularly humid, unventilated area ventilation equipment should be used to speed up the waterproof layer to dry. 24 hours after construction shall test the water and completely dry before do other overburden layers. Storage: The product should be placed in a cool, well-ventilated place, unopened product can be stored for one year. Packing: 9kg / barrel (2.65kg emulsion +6.35 kg powder) 18kg barrel +12.7 kg powder (5.3 kg emulsion) 34kg / group (10kg the emulsion +24 kg powder)