Welcome To b2b168.com, Join Free | Sign In 
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
 | No.9294226
 | No.9294226
- Product Categories
 
- Friendly Links
 
- home > Supply > The supply reservoir engineering preferred Guangzhou factory Ou Nike waterproof material
 
| Information Name: | The supply reservoir engineering preferred Guangzhou factory Ou Nike waterproof material | 
| Published: | 2013-04-26 | 
| Validity: | 0 | 
| Specifications: | |
| Quantity: | 1000000000.00 | 
| Price Description: | |
| Detailed Product Description: | Rigid waterproof material super penetration can penetrate the surface of cement-based 3-5cm, to form a three-dimensional crystals of high activity, effectively clogging the pores of the cement matrix and micro-cracks, and automatically fix achieve permanent waterproof effect. Fast drying time, high compressive strength, good wear resistance. The main ingredients of inorganic materials, without the worry of aging. Nontoxic, green. Dry sprinkle on cement mortar cover surface modification of light, can also be mixed and stirred applied to the basal plane, simple and convenient. Scope: plant, warehouse, basement waterproofing, moisture, swimming pool, dam has a stable structure waterproof. The Dosage: flat base surface 1.5-2kg/m2. Usage: clean the base surface should be smooth and firm, without hollowing. Pores, trachoma is required with cement mortar to fill the flat, sharp edges should be removed. Such as high temperatures or drier base surface, before the construction of the application of water to fully wet to ignorance and water shall prevail. Construction Technology: for concrete, mortar to cover repair the dry shake mortar surface light. For painting, water poured into the mixing bucket, with electric mixer while stirring slowly add the powder, stir until the silt, the no precipitation paste, put it aside for a few minutes and then stir slightly . Mixing ratio: A, used for brushing: powder: water = 25: (7-8), B, used for wiping pressure: powder: water = 25: (6-7). First pass brushing, brushing there is air bubble should be repeated brushing the gas discharges, brushing thickness of 0.8mm is appropriate; was smooth. After brushing the first pass should let the surface dry (just sticky hands) applied a second time, smear should be directed to an interleaved, such as first pass completely dry, should be re-wet painting a second time. For moisture-proof, smear it again, and used for waterproofing, apply two to three times. Note: You can not below 0 ℃ or rain construction. Avoid mixing has been dry mortar and water reuse. Slurry dries, it is recommended that water conservation with a fine mist of 5-7 days in order to achieve the best results, such as rainy days or the air is very humid Nature Conservation in 7 days to do a follow-up construction. Storage: This product is produced in a cool dry place, do not let the reach of children. Product packaging: 25kg / bag  | 
Admin>>>
You are the 15753 visitor
Copyright © GuangDong ICP No. 10089450, Europe Nike Building Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 15753 visitor
Copyright © GuangDong ICP No. 10089450, Europe Nike Building Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility

