Flexible waterproof coating Features: 1, non-toxic, environmental protection, can be used for drinking water, pool waterproof material. 2, good flexibility, can resist the shot of the building vibration and micro-cracks. 3, strong bonding with the substrate, brushing have good results in a variety of complex surface of the base. Scope: roofing, interior and exterior, kitchen, bathroom, pool, bridge, basement waterproofing. Construction program base surface treatment: 1, the base surface is clean and should be smooth and firm, without hollowing. Pores, trachoma is required with cement mortar to fill the flat, sharp edges should be removed. Such as high temperatures or drier base surface, before the construction of the application of water to fully wet to ignorance and water shall prevail. Construction process first liquid material into the mixing bucket, stirring slowly pour the powder with an electric mixer side, stir until evenly without powder, no precipitation paste, put it aside for a few minutes and then stirred slightly can be used. Directly with a brush or roller brushing the processed base surface, non-leakage brush, brushing if holes should be repeated brushing the gas discharges. After brushing first pass should be treating its table (just sticky) after brushing the second time, the second brushing direction should be staggered to the front again, brushing a thickness of not more than 0.8 mm, so as not to affect the construction effect . Note: can not be below 0 ℃ or rain construction, the stirred slurry should be used within 2 hours. The air is particularly humid, unventilated area ventilation equipment should be used to speed up the waterproof layer to dry. 24 hours after construction shall not test the water and completely dry before do other overburden layers. Storage: The product should be placed in a cool, well-ventilated place, unopened product can be stored for one year. Dosage: flat base surface of the 1.3-1.8kg / m 2. Packing: 9kg / barrel 18kg / drum 34kg / group