The permeability of the top ten brands of waterproof coating, strong bond, the active ingredient in the slurry can penetrate into the cement base surface pores, micro-cracks 3-5mm, blend with the substrate to form a waterproof layer of fine crystal, even in the epidermal damage is not easy to produce leakage. Anti-aging properties, construction is simple, can moist basic plane. Do not need to do a protective layer of mortar slurry dries, you can directly paste tiles and other follow-up construction. Scope: interior and exterior, kitchen, bathroom, storage, pool and other water and wood floors, wooden wardrobe, wallpaper Stones moisture treatment. The Dosage: flat base surface 0.6-1kg/m2. Construction program: clean the base surface should be smooth and firm, without hollowing. Pores, trachoma is required with cement mortar to fill the flat, sharp edges should be removed. Such as high temperatures or drier base surface, before the construction of the application of water to fully wet to ignorance and water shall prevail. Construction Technology: Yi Tu wall into the mixing bucket, stirring slowly added to the cement powder edge with an electric mixer, stir until evenly without powder, no precipitation can be used. Asked to join the cement 425 # portland cement, cement is added in an amount of: liquid material: cement = 1:0.8. Direct brushing with a brush or roller in good base surface, can not be missed brush, brushing if holes should be repeated brushing the gas discharges. After brushing the first pass should let it the table dry (just sticky) the second time after brushing, brushing should be directed to the front again staggered, brushing can not exceed the thickness of 0.6mm so as not to affect the construction effects. Note: can not be below 0 ℃ or rain construction, the stirred slurry should be used within 2 hours. The air is particularly humid, unventilated area ventilation equipment should be used to speed up the waterproof layer to dry. 24 hours after construction shall not test the water and completely dry before do other overburden layers. Storage: The product should be placed in a cool, well-ventilated place, unopened product can be stored for one year. Packing: 5kg / 25kg / barrel bottle