The insulation coating non-toxic, environmental protection, good weather resistance. The use of heat-reflective high-tech insulation materials, the effect is significant. Scope: construction, exterior walls, steel tile surface, tile surface of the zinc, iron, asbestos tile surface, open metal storage tanks. Dosage: flat base surface about 0.6-1.0kg/m2. Construction procedures: 1, the base surface clean and should be smooth and firm, without hollowing. 2, porosity, trachoma is required with cement mortar to fill a smooth, sharp edges should be removed. 3, such as high temperatures or drier base surface, application of water to fully wet the pre-construction to ignorance and water shall prevail. 4, the base surface cracks shall be affixed with a highly flexible waterproof material non-woven back together. Construction Technology: direct brushing with a brush or roller in good base surface can not be missed brush, brushing, if any pores should be repeated brushing the gas discharges. After brushing the first pass should let it the table dry (just sticky) after brushing the second time, the second time brushing direction should be staggered to the front again, each brushing can not exceed 0.5 mm in thickness, so as not to affect the construction effect. Special requirements of the construction surface, in the middle paved non-woven increase the toughness of the coating. Construction good heat insulation and waterproofing coating should prevent excessive walking or sharp objects, the weight of the damage, and keep them clean. Note: You can not below 0 ℃ or rain construction, coating is not completely dry (24 hours) to prevent flooding and frost. Storage: The product should be placed in a cool, well-ventilated place, unopened product can be stored for one year. Product packaging: 10kg / barrel 20kg / barrel